Resistance Furnace: Independently developed products are gradually optimized

Suzhou Jiuwei Electric Furnace Equipment Co., Ltd. has special insights on resistance furnaces: independent development of products and gradual optimization

This series of electric furnaces are aluminum silicate ceramic fiber furnace resistance furnaces developed in response to the requirements of Japanese customers. The furnace body adopts a double-layer structure design and is equipped with a cooling fan. The general temperature of the furnace body is close to normal temperature during use. This method should add enhanced control constraints to the fms system or control the allocation of capital through offline institutions to ensure that all processes of the system can proceed smoothly. K-type thermocouple temperature sensor is a cheap high-temperature sensor commonly used in industrial production. It has the advantages of high measurement accuracy, wide measurement scale, simple mechanism and convenient use. Second, the air consumption of the furnace. 6. Reduce the weight of tooling, increase the quality ratio of forgings and tooling, and increase the efficiency of the furnace's thermal energy utilization. (Optional (7 has light weight, fast heating speed, energy saving, environmental protection, time saving, and can meet all kinds of fast sintering requirements. Single-chip selection intelligent instrument l system hardware structure As a micro controller, its most significant feature is that it contains flash memory on-chip, which is convenient for changing the program code.

The choice of furnace type is based on the production characteristics, and it is planned to select a medium-temperature box-type heat treatment resistance furnace. , Pay attention to the inspection of the automatic control instrument during work to avoid over-temperature caused by the missing instrument; if the instrument or electrical appliance is found to be missing, it is reasonable to stop the furnace immediately and ask the relevant personnel to check and repair. In a graphical representation of a petri network, some places will contain a number of small black dots, called token (tken.clk: clock pulse input terminal. It is forbidden to pour any liquid into the furnace. In May 2007, the entire system was commissioned. Operation, the subject cutoff was completed in October 2007. c. The list of spare parts is complete and accurate, and all manuals for operation and preventive maintenance are complete and properly retained.

tλ meets the requirements of general heat treatment resistance furnace temperature rise t. A copy of the verification certificate should be attached to the verification plan. jb, r8-4 The various types of trolley furnaces are divided into multiple specifications according to the size of the work area, and the size of the work area should be suitable for the following. It is strictly forbidden to put wet workpieces. The workpieces heated in the furnace and the electric heating elements should be connected with a distance of 50-70mm; Exhaust gas should be discharged through a valve with a water seal. For low-temperature furnaces such as tempering and aging, the oxidative decarburization should be stopped, and a gas-friendly assembly should be installed.

The air inlet distribution of the mesh belt resistance furnace (top view) is as follows. Method 2 Operation Link Method Insert  Animation Select "" in the menu to insert and remove "" in the media to open the dialog box. Resistance furnace manufacturers