Resistance furnace unit leader, stable growth in the future can be expected

Brief introduction to the structure of Beijing spot box-type resistance furnace (95℃). The instrument allows the temperature curve value to be changed during containment, suspension, and operating conditions. Substituting the above three equations, there are tke(ke(ku(kke(kti∑e(iti0dtke(ke(kke(kβki∑e(ikdi0t), where t is the sampling time, and the β term is the switching coefficient of the integral term ek≤ββ0ekβ integral break up id control algorithm standard 0. However, in reality, the extraordinary requirement items that can be selected by the demand side are selected by the supplier according to their own premises with reference to the department. Refer to the domestic and foreign remote control software, independently develop remote real-time control software, and achieve great Remote control and networking operation of type heating equipment. Is there a difference in appearance? Is there a difference in other places, such as heating methods? Is there a difference in their application scale? There is no difference in the affair of trying electric furnaces, but the tube type ( Also known as horizontal type) some integrate the thermometer on the base, which looks small, while the box type takes up a lot of space, (the box type) has a dedicated iron shelf, and the box type I think it will end with heat preservation. Better than tubular.

Beijing spot box-type resistance furnace (95℃) Technical parameters: pid control, high temperature control accuracy: plus or minus 1℃ Rated power: 5kw Peak working temperature: 95℃ Furnace size (mm): 12×6×Overall dimensions: 22× Loading capacity of 193×2 (kg):

This kind of resistance furnace with over-temperature alarm function has two voltages of 220v and 380v, and four temperature scales of 900 degrees, 1000 degrees, 1200 degrees, and 1300 degrees can be selected. The iron filings and oxides in the furnace should be frequently eliminated to ensure the cleanliness of the furnace. 7531 The implementation rules for the supervision of metal structure installation are wrong and undecided. In the production process of slab continuous casting, the temperature of the equipment below the mold is very high, and it is corrosive air, which will cause high-temperature deformation and erosion of the equipment.

Turn on the power switch. At this time, the green light on the temperature indicating instrument is on, the relay starts to work, the box-type resistance furnace is energized, and the ammeter displays the current. Because the single-chip microcomputer has the characteristics of low power consumption, high performance, good reliability, and easy productization, the use of single-chip microcomputer to control the temperature not only saves costs, the control method is flexible and diverse, but also can achieve higher control accuracy, which can greatly To greatly improve the quality of products, single-chip microcomputers are widely used in small and medium-sized control systems. Use the built mathematical model to compare with the actual measured value, and the error is small. Then:'the average temperature ts of the refractory layer s is uniform, the average temperature ts of the aluminum silicate fiber layer s is uniform, and the average temperature ts of the expanded perlite layer s is uniform. And has completed a number of related projects one after another, and the technology is fundamentally risk-free. It has a flexible structure, not only can be adjusted with conventional id, but also can be used in accordance with the requirements of the system, using various id variants, such as i, d control and improved id control.

As the internal temperature of the box-type resistance furnace increases, the pointer of the temperature indicating instrument also gradually rises. This phenomenon indicates that the system is working normally. 52. The construction unit with drawings issued by the contracting party should be studied to understand the design intent and design requirements and to do various construction preparations in accordance with normal procedures. Divided into: t and g two types of t series furnace aluminum silicate ceramic fiber furnace is an upgraded product of traditional furnace. It has the characteristics of light weight, fast heating speed, energy saving and time saving, and can meet the requirements of various types of fast sintering; g The series furnaces are made of traditional refractory materials, which have the characteristics of wide application scale and high cost performance. Lightweight clay bricks, popular aluminum silicate fiber felt with a density of kg, a-grade diatomaceous earth bricks. Check the furnace shell temperature t wall. Record the control parameter id in order to prevent inadvertent loss and affect control accuracy. The dip package is more convenient when setting up a test circuit. 1. Equipment cleaning: The furnace tank is cleaned once a week during continuous production. The cleaning of intermittent production furnace tanks should be carried out immediately after the furnace is shut down. When the furnace tank cleaning temperature is 850 ~ 870 ℃, all the chassis should be taken out; use compression When the air nozzle is blown in from the feed end of the furnace, the valve should not be opened too much, and it must be moved back and forth when blowing to prevent local overheating; the gas burner is cleaned with petroleum before carburizing. Resistance furnace manufacturers