The main factors affecting the effect of resistance furnace, etc.

Suzhou Jiuwei Electric Furnace Equipment Co., Ltd. has special opinions on the main factors affecting the effect of resistance furnaces

5-12 Tubular resistance furnace (new product) Product model:. Lightweight bricks and thermal insulation materials are built between the hearth and the furnace body. The clock pulse sent out is directly sent to the time control component in the single-chip microcomputer. Divide the value of the busy high-level time timer by and subtract it. The remainder is the value of the measured voltage. It can replace old products of sx-2-6 that have been cut down. The furnace temperature should be able to rise to the test temperature within one press time. The rated power of the 1225 hydrogen furnace should be in the product standard. Therefore, the melting phase is not used because iron crucibles are not used, and there is no iron growth, and it is heated by radiation. There is no violent agitation of the liquid, and there is little suction. This is because the machine and steam significantly improve the quality of casting; i. Ideal non-ferrous metal melting equipment in the automotive industry. ., The ash seam of the furnace wall is not large, and the ash seam of the furnace bottom is not large. The control board has a phase-locked loop synchronization circuit, automatic phase identification, phase loss protection, power-on slow start, slow shutdown, radiator over-temperature detection, constant current output, current limit, over-current protection, serial working status indication, etc. .

Jinhua City Jinlan Reservoir Danger Removal and Reinforcement Project Supervision Implementation Regulations Zhejiang Water Conservancy and Hydropower Construction Supervision Company Jinhua City Jinlan Reservoir Reinforcement Project Supervision Department 1sl63-7b High vacuum carbon tube resistance furnace function and primary technical parameters Function and structure introduction sl63-7b Vacuum Carbon tube resistance furnace is a high-temperature, high-vacuum resistance furnace that uses graphite as a fever body. It can be used for heating metals, refractory compounds and ceramic materials in a vacuum or protective air to achieve brazing and joining of materials. In terms of theory and function, the name of three-phase (single-phase thyristor power controller is commonly used. When metal materials with grease or the like need to be heated, a large amount of volatile gas will affect and corrode the electric heating element. Make it destroy and shorten the life.

The high-temperature box-type resistance furnace uses silicon carbide rods as the heating element to be installed directly in the furnace, and the thermal operation rate is high. Note: (The furnace wall is usually built with standard bricks, so the size of the furnace wall should be the standard brick size (×× plus the thickness of the brick joints (generally a multiple of). In this design, the measuring device ad is used. Application for science and technology three) The budget is based on the use of this item. The peak working temperature of the high-temperature ceramic hydrogen molybdenum wire furnace is 1,700 to 1,800 degrees Celsius, and the tungsten rod furnace can reach 2,500 degrees Celsius. Resistance furnace manufacturers